| Equalizer |
2 x 16-band PEQ/notch/shelving/asymmetric |
| Latency analog and digital inputs |
0.3 ms |
| Delay setting |
0.3 ms – 10 s |
| Configurations |
Current d&b loudspeakers (except SL-Series, J-Series, V-Series, B2-SUB, M2 monitor) and linear mode |
| Function switches |
d&b loudspeaker specific circuits |
| Frequency generator |
Pink noise or Sine wave 10 Hz – 20 kHz |
| SRC |
Selectable for AES 1/2 and 3/4 |
| Sampling rate |
96 kHz/27 Bit ADC/24 Bit DAC |
| INPUT ANALOG (A1 - A4) |
3-pin Phoenix Euroblock male |
| ANALOG LINK (A1 - A4) |
3-pin Phoenix Euroblock male |
| INPUT DIGITAL (D1/2, D3/4) |
3-pin Phoenix Euroblock male, AES3 |
| DIGITAL LINK (Output) |
3-pin Phoenix Euroblock male |
| Sampling Digital AES/EBU |
48 kHz/96 kHz |
| Speaker outputs A/B/C/D |
2 x 4-pin Phoenix Euroblock female |
| Mix TOP/SUB / 2-Way Active output A/B and C/D |
2 x 4-pin Phoenix Euroblock female |
| Sampling rate |
48/96 kHz / 2 Ch/n |
| GPIO |
1 x 6-pin Phoenix Euroblock male |
| CAN |
2 x RJ 45 parallel |
| Ethernet |
2 x RJ 45, 10/100 Mbit Ethernet |
| Mains connector |
powerCON® |
| FAULT |
1 x 3-pin Phoenix Euroblock male |
